Microsoft AZ-102 Study Guides 2019

AZ-102 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library! Try it Free Today!

https://www.exambible.com/AZ-102-exam/

Product Description:
Exam Number/Code: AZ-102
Exam name: Microsoft Azure Administrator Certification Transition
n questions with full explanations
Certification: Microsoft Certification
Last updated on Global synchronizing

Free Certification Real IT AZ-102 Exam pdf Collection

AZ-102 Free Practice Questions for Microsoft certification, Real Success Guaranteed with Updated AZ-102 Dumps. 100% PASS AZ-102 Microsoft Azure Administrator Certification Transition exam Today!

Free AZ-102 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
HOT SPOT
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual machines named VM1 and VM2. VM1 and VM2 run Windows Server 2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent. VM1 is affected by ransomware that encrypts data.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-102 dumps exhibit

    Answer:

    Explanation: Box 1: VM1 only
    To restore files or folders from the recovery point, go to the virtual machine and choose the desired recovery point.
    Box 2: A new Azure virtual machine only
    On the Restore configuration blade, you have two choices: Create virtual machine
    Restore disks References:
    https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm https://docs.microsoft.com/en-us/azure/backup/backup-azure-arm-restore-vms

    NEW QUESTION 2
    HOT SPOT
    You have an Azure subscription named Subscroption1. In Subscription1, you create an alert rule named Alert1.
    The Alert1 action group is configured as shown in the following exhibit.
    AZ-102 dumps exhibit
    Alert1 alert criteria is triggered every minute.
    Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
    NOTE: Each correct selection is worth one point.
    AZ-102 dumps exhibit

      Answer:

      Explanation: Box 1: 60
      One alert per minute will trigger one email per minute. Box 2: 12
      No more than 1 SMS every 5 minutes can be send, which equals 12 per hour.
      Note: Rate limiting is a suspension of notifications that occurs when too many are sent to a particular phone number, email address or device. Rate limiting ensures that alerts are manageable and actionable.
      The rate limit thresholds are:
      SMS: No more than 1 SMS every 5 minutes. Voice: No more than 1 Voice call every 5 minutes. Email: No more than 100 emails in an hour. Other actions are not rate limited.
      References:
      https://github.com/MicrosoftDocs/azure-docs/blob/master/articles/monitoring-anddiagnostics/ monitoring-overview-alerts.md

      NEW QUESTION 3
      You have an Azure Service Bus.
      You create a queue named Queue1. Queue1 is configured as shown in the following exhibit.
      AZ-102 dumps exhibit
      Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
      NOTE: Each correct selection is worth one point.
      AZ-102 dumps exhibit

        Answer:

        Explanation: Box 1: deleted after two hours
        All messages sent into a queue or topic are subject to a default expiration that is set at the entity level with the defaultMessageTimeToLive property and which can also be set in the portal during creation and adjusted later. The default expiration is used for all messages sent to the entity where TimeToLive is not explicitly set. The default expiration also functions as a ceiling for the TimeToLive value. Messages that have a longer TimeToLive expiration than the default value are silently adjusted to the defaultMessageTimeToLive value before being enqueued.
        Box 2: deleted in one hour References:
        https://docs.microsoft.com/en-us/azure/service-bus-messaging/message-expiration

        NEW QUESTION 4
        Note: This Questions is part of a series of questions that present the same scenario. Each questions in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution. After you answer a questions in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
        You receive a notification that VM1 will be affected by maintenance. You need to move VM1 to a different host immediately.
        Solution: From the Redeploy blade, you click Redeploy. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: A

        Explanation: When you redeploy a VM, it moves the VM to a new node within the Azure infrastructure and then powers it back on, retaining all your configuration options and associated resources.
        References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-newnode

        NEW QUESTION 5
        SIMULATION
        Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        When you are finished performing all the tasks, click the ‘Next’ button.
        Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
        Overview
        The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
        Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
        Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
        To start the lab
        You may start the lab by clicking the Next button.
        You need to deploy an Azure virtual machine named VM1004a based on the Ubuntu Server 17.10 image, and then to configure VM1004a to meet the following requirements:
        The virtual machine must contain data disks that can store at least 15 TB of data. The data disks must be able to provide at least 2,000 IOPS.
        Storage costs must be minimized.
        What should you do from the Azure portal?

          Answer:

          Explanation: 1. Open the Azure portal.
          2. On the left menu, select All resources. You can sort the resources by Type to easily find your images.
          3. Select the image you want to use from the list. The image Overview page opens.
          4. Select Create VM from the menu.
          5. Enter the virtual machine information.
          Select VM1004a as the name for the first Virtual machine.
          The user name and password entered here will be used to log in to the virtual machine. When complete, select OK. You can create the new VM in an existing resource group, or choose Create new to create a new resource group to store the VM.
          6. Select a size for the VM. To see more sizes, select View all or change the Supported disk type filter. To support 15 TB of data you would need a Premium disk.
          7. Under Settings, make changes as necessary and select OK.
          8. On the summary page, you should see your image name listed as a Private image. Select Ok to start the virtual machine deployment.
          References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/create-vmgeneralized- managed

          NEW QUESTION 6
          You have a Microsoft SQL Server Always On availability group on Azure virtual machines. You need to configure an Azure internal load balancer as a listener for the availability group. What should you do?

          • A. Enable Floating IP.
          • B. Set Session persistence to Client IP and protocol.
          • C. Set Session persistence to Client IP.
          • D. Create an HTTP health probe on port 1433.

          Answer: A

          Explanation: Incorrect Answers:
          D: The Health probe is created with the TCP protocol, not with the HTTP protocol. References:
          https://docs.microsoft.com/en-us/azure/virtual-machines/windows/sql/virtual-machines-windowsportal- sql-alwayson-int-listener

          Case Study: 6
          Lab 1 SIMULATION
          The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
          Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
          Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
          Please, note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
          To start the lab
          You may start lab by clicking the Next button Tasks
          Click to expand each objective
          To connect to the Azure portal, type https:/portal.azure.com in the browser address bar. Instructions
          Performance Based Lab
          This type of question asks you to perform tasks in a virtual environment.
          The screen for this type of question includes a virtual machine window and a tasks pane.
          The window is a remotely connected live environment where you perform tasks on real software and applications.
          On the right is a Tasks pane that lists the tasks you need to perform in the lab. Each task can be expanded or collapsed using the “+” or “-” symbols. A checkbox is provided for each task. This is provided for convenience, so you can mark each task as you complete it.
          Tasks
          Click to expand each objective
          -Configure servers
          Add the “Print and Document Services” role to server LON-SVR1, installing any required management features and enabling both Print and LPD Services.
          +Configure file and share access
          When you are finished performing all the tasks, click the ‘Next’ button.
          Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
          Comments
          Once the exam completes, the comment period will begin and you will have the opportunity to provide comments to Microsoft about the exam questions. To launch the comment period, click the “Finish” and then “Comment” buttions. To skip the comment period and the exam, click Exit.
          You can navigate to a question from the Review screen to provide a comment. Please, see the Review Screen tab in the Review Screen help Menu (which can be accessed from the Review Screen) for details on accessing questions from the Review Screen.
          To comment on a question, navigate to that question and click the Give Feedback icon. When you have entered your comment in the comment window, click Submit to close the window. To navigate to the Review screen again, click the Review button. You may navigate through all questions using the Next and Previous buttions. To skip commenting, go to the Review Screen by selecting the Review Screen button in the upper left-hand corner and from the Review Screen, select “Finished”.
          Controls Available
          For any question, one or more of the following controls might be available.
          AZ-102 dumps exhibit
          Keyboard Shortcuts Available
          Exam features may be accessed using keyboard shortcuts. The following table describes the keyboard shortcuts that are available during this exam.
          Some keyboard shortcuts require that you press two or more keys at the same time. These keys are separated by a plus sign (+) in the table below.
          AZ-102 dumps exhibit
          AZ-102 dumps exhibit
          AZ-102 dumps exhibit

          NEW QUESTION 7
          Your marketing team creates a new website that you must load balance for 99.99 percent availability. You need to deploy and configure a solution for both machines in the Web-AS availability set to load balance the website over HTTP. The solution must use the load balancer your resource group.
          What should you do from the Azure portal?

            Answer:

            Explanation: To distribute traffic to the VMs in the availability set, a back-end address pool contains the IP addresses of the virtual NICs that are connected to the load balancer. Create the back-end address pool to include the VMs in the availability set.
            Step 1:
            Select All resources on the left menu, and then select LoadBalancer from the resource list. Step 2:
            Under Settings, select Backend pools, and then select Add. Step 3:
            On the Add a backend pool page, select the Web-AS availability set, and then select OK:
            AZ-102 dumps exhibit
            References:
            https://docs.microsoft.com/en-us/azure/load-balancer/quickstart-create-basic-load-balancer-portal

            NEW QUESTION 8
            You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access to any resource in the resource group named 7509086.
            You need to create the Azure AD group and then to assign the correct to e to the group. The solution must use the principle of least privilege and minimize the number of role assignments.
            What should you do from the Azure portal?

              Answer:

              Explanation: Step 1:
              Click Resource groups from the menu of services to access the Resource Groups blade
              AZ-102 dumps exhibit
              Step 2:
              Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter corp7509086 as the Resource group name, and click the Create button.
              AZ-102 dumps exhibit
              Step 3: Select Create.
              Your group is created and ready for you to add members. Now we need to assign a role to this resource group scope. Step 4:
              Choose the newly created Resource group, and Access control (IAM) to see the current list of role assignments at the resource group scope. Click +Add to open the Add permissions pane.
              AZ-102 dumps exhibit
              Step 5:
              In the Role drop-down list, select a role Delegate administration, and select Assign access to: resource group corp7509086
              AZ-102 dumps exhibit
              References:
              https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azuremarketplace- resource-group.html

              Case Study: 11
              Mix Questions Set E (Security Identities)

              NEW QUESTION 9
              DRAG DROP
              You have an Azure subscription that is used by four departments in your company. The subscription contains 10 resource groups. Each department uses resources in several resource groups.
              You need to send a report to the finance department. The report must detail the costs for each department. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
              AZ-102 dumps exhibit

                Answer:

                Explanation: Box 1: Assign a tag to each resource.
                You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy. After you apply tags, you can retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
                Box 2: From the Cost analysis blade, filter the view by tag
                After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in Azure portal.
                Visit the Subscriptions blade in Azure portal and select a subscription. You should see the cost breakdown and burn rate in the popup blade.
                Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data to populate.
                You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if you want to export the view to a Comma-Separated Values (.csv) file. Box 3: Download the usage report
                References:
                https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags https://docs.microsoft.com/en-us/azure/billing/billing-getting-started

                NEW QUESTION 10
                HOT SPOT
                You need to configure the Device settings to meet the technical requirements and the user requirements.
                Which two settings should you modify? To answer, select the appropriate settings in the answer area.
                AZ-102 dumps exhibit

                  Answer:

                  Explanation:
                  Box 1: Selected
                  Only selected users should be able to join devices Box 2: Yes
                  Require Multi-Factor Auth to join devices. From scenario:
                  Ensure that only users who are part of a group named Pilot can join devices to Azure AD
                  Ensure that when users join devices to Azure Active Directory (Azure AD), the users use a mobile phone to verify their identity.

                  NEW QUESTION 11
                  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
                  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
                  You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
                  You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Automation script.
                  Does this meet the goal?

                  • A. Yes
                  • B. No

                  Answer: B

                  NEW QUESTION 12
                  You create an Azure subscription that is associated to a basic Azure Active Directory (Azure AD) tenant. You need to receive an email notification when any user activates an administrative role. What should you do?

                  • A. Purchase Azure AD Premium 92 and configure Azure AD Privileged Identity Management,
                  • B. Purchase Enterprise Mobility + Security E3 and configure conditional access policies.
                  • C. Purchase Enterprise Mobility + Security E5 and create a custom alert rule in Azure Security Center.
                  • D. Purchase Azure AD Premium PI and enable Azure AD Identity Protectio

                  Answer: A

                  Explanation: When key events occur in Azure AD Privileged Identity Management (PIM), email notifications are sent. For example, PIM sends emails for the following events:
                  When a privileged role activation is pending approval When a privileged role activation request is completed When a privileged role is activated
                  When a privileged role is assigned When Azure AD PIM is enabled References:
                  https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pimemail- notifications

                  NEW QUESTION 13
                  You have an Azure Logic App named App1. App1 provides a response when an HTTP POST request or an HTTP GET request is received.
                  During peak periods, App1 is expected to receive up to 200,000 requests in a five-minute period. You need to ensure that App1 can handle the expected load.
                  What should you configure?

                  • A. Access keys
                  • B. Access control (1AM)
                  • C. API connections
                  • D. Workflow settings

                  Answer: D

                  Explanation: Here are the limits for a single logic app definition:
                  AZ-102 dumps exhibit
                  References:
                  https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-limits-and-config

                  NEW QUESTION 14
                  HOT SPOT
                  You have an Azure subscription named Subscription1.
                  In Subscription1, you create an Azure file share named share1.
                  You create a shared access signature (SAS) named SAS1 as shown in the following exhibit.
                  AZ-102 dumps exhibit
                  To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
                  AZ-102 dumps exhibit

                    Answer:

                    Explanation: Box 1: Will be prompted for credentials
                    Azure Storage Explorer is a standalone app that enables you to easily work with Azure Storage data on Windows, macOS, and Linux. It is used for connecting to and managing your Azure storage accounts.
                    Box 2: Will have read, write, and list access
                    The net use command is used to connect to file shares. References:
                    https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signaturepart- https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storageexplorer? tabs=windows

                    NEW QUESTION 15
                    You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com. Your company has a public DNS zone for contoso.com.
                    You add contoso.com as a custom domain name to Azure AD. You need to ensure that Azure can verify the domain name.
                    Which type of DNS record should you create?

                    • A. RRSIG
                    • B. PTR
                    • C. DNSKEY
                    • D. TXT

                    Answer: D

                    Explanation: Create the TXT record. App Services uses this record only at configuration time to verify that you own the custom domain. You can delete this TXT record after your custom domain is validated and configured in App Service.
                    References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain

                    NEW QUESTION 16
                    You plan to move services from your on-premises network to Azure.
                    You identify several virtual machines that you believe can be hosted in Azure. The virtual machines are shown in the following table.
                    AZ-102 dumps exhibit
                    Which two virtual machines can you access by using Azure migrate? Each correct answer presents a complete solution.
                    NOTE: Each correct selection is worth one point.

                    • A. Sea-CA0l
                    • B. Hou-NW01
                    • C. NYC-FS01
                    • D. Sea-DC01
                    • E. BOS-DB01

                    Answer: CE

                    NEW QUESTION 17
                    You are configuring serverless computing in Azure.
                    You need to receive an email message whenever a resource is created in or deleted from a resource group. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
                    AZ-102 dumps exhibit

                      Answer:

                      Explanation: Step 1: Create an event subscription
                      When you subscribe to events for a resource group, your endpoint receives all events for that resource group. Step 2: Create an Azure Event Grid trigger
                      Step 3: Create conditions and actions References:
                      https://docs.microsoft.com/en-us/azure/event-grid/event-schema-resource-groups

                      100% Valid and Newest Version AZ-102 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/AZ-102-exam-dumps.html (New 195 Q&As)