Rebirth 400-051 Exam Study Guides With New Update Exam Questions

400-051 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library! Try it Free Today!

https://www.exambible.com/400-051-exam/

Product Description:
Exam Number/Code: 400-051
Exam name: CCIE Collaboration
n questions with full explanations
Certification: Cisco Certification
Last updated on Global synchronizing

Free Certification Real IT 400-051 Exam pdf Collection

We provide real 400-051 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 400-051 Exam quickly & easily. The 400-051 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 400-051 dumps pdf and vce product and material, you can easily pass the 400-051 exam.

P.S. High quality 400-051 torrent are available on Google Drive, GET MORE: https://drive.google.com/open?id=1AN2bFpCB-qcZP9p7zG0zM-XgNuMP9vne


New Cisco 400-051 Exam Dumps Collection (Question 7 - Question 16)

Question No: 7

Refer to the exhibit.

Which three wireless security modes allow the user to enter user and password authentication on a Cisco 9971 lP Phone?

A. Shared Key

B. EAP-FAST

C. Open with WEP

D. Open

E. LEAP

F. AKM

Answer: BEF


Question No: 8

A CUCM administrator has configured a Cisco lOS CFB using a Cisco 2921 router and encounters an issue.

What is the root cause?

A. The CFB sent the registration message twice

B. The CFB protocol version is not compatible with this CUCM version

C. CUCM has not received the first keepalive message from CFB

D. Device type in CUCM does not match the one configured on Cisco lOS

E. CUBE_CFB name was entered incorrectly in CUCM database

Answer: D


Question No: 9

Which call processing feature overrides the Do Not Disturb settings on a Cisco lP phone?

A. Park reversion for remotely parked calls by a shared line.

B. terminating side of a call back

C. pickup notification

D. hold reversion

E. remotely placed pickup request by a shared line

Answer: D


Question No: 10

Refer to the exhibit.

A customer is configuring CAR costing for call. When the customer runs the costing reports calls are not being tagged correctly. Which two changes allow proper costing to be determined for these calls? (Choose two)

A. The toll free area code field must be updated to include all toll free area codes

B. A new local pattern must be added with the pattern "k "

C. A new pattern must be added for the 914 and 625 area codecs

D. The items are out of order and must be sorted with the most specific at the top

E. Overlapping area codec on the trunks must be removed

F. All external patterns must be change to include the outside access code

Answer: AB

Explanation:

Choose System > System Parameters > Dial Plan Configuration.

The Dial Plan Configuration window displays.

ln the Toll Free Numbers field, enter the numbers in your dial plan that can be placed without a charge.

lf the number of digits dialed equals 10 and the pattern is K (more than one digit, in this case a 10-digit number that starts with a trunk code),

the call gets classified as Local.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/car/CUCM_BK_CB39F074_00_cdr-analysis-reporting-administration-90/CUCM_BK_CB39F074_00_cdr-analysis-and-reporting-administration_chapter_011101.html


Question No: 11

Refer to exhibit:

A Cisco Unified CM engineer configured a phone VPN for remote users but the users cannot register the phones to the VPN which configuration changes fixes this problem?

A. Configure enable outside in the webVPN configuration on the Cisco ASA

B. Configure the split-tunnel-policy tunnel all attribute on the Cisco ASA

C. Configuration the ssl trust-point SSL outside on the Cisco ASA

D. Remove the Cisco ASA lP address from the VPN load-balancing configuration

Answer: D


Question No: 12

Refer to the exhibit.

A collaboration engineer is troubleshooting a cluster that has been configured to use RSVP. The calls are being rejected and the caller receives a busy tone. What is the root cause of this problem?

A. The RSVP Agents are only using an lpv6 address.

B. The lP Addressing mode preference for signalling is set to use System Default.

C. The RSVP relationship between Main and Remote is set to Mandatory

D. The lP Addressing Mode is set to use lpv4 and lpv6

Answer: A


Question No: 13

Refer to the exhibit.

A collaboration engineer configured MVA for a company using an existing Cisco lOS voice gateway. When testing inbound calls it is found that they are all failing.

Which two sets of configuration changes fix this problem? (Choose two)

A. Dial-peer voice 4100 pots Services ccm

Destination-pattern 4100$

B. Dial-peer voice 4101 voip

Dtmf-relay h245-alphanumeric

Session target ipv4:172.16.100.50

C. Dial-peer voice 4101 voip

Dtmf-relay h245-alphanumeric

Session target ipv4:172.16.100.50

Codec g711ulaw

D. Dial-peer voice 4100 pots

service CCM

E. Dial-peer voice 4100 pots

service CCM

lncoming called-number .T

F. Dial-peer voice 4101 VOlP

Dtmf-relay h245-signal

Session target ipv4:172.16.100.50 Codec g711alaw

Answer: CE

Explanation:

Please note that, current scenario we are talking only inbound calls.Tricky question

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-

callmanager/200457-Configure-the-Mobile-Voice-Access-Featur.html#anc6

Configuration Example

application

service mva http://10.106.103.149:8080/ccmivr/pages/lVRMainpage.vxml

dial-peer voice 5050 pots

service mva

incoming called-number 5050

no digit-strip

direct-inward-dial

dial-peer voice 3001 voip

destination-pattern 5050

session target ipv4:10.106.103.149

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad


Question No: 14

Which option describes how NVF, OpenStack and KVM relate to each other? (Choose two.)

A. OpenStack and KVM can be used to provide NVF

B. OpenStack and KVM are not related to NVF

C. NVF and KVM are based on OpenStack

D. OpenStack and NVF enable KVM.

Answer: B


Question No: 15

Refer to the exhibit.

What happens to the USB e-token after the administrator fails to enter the correct password at the next attempt?

A. The token is locked for five days, after which the retry counter resets.

B. The token is locked until unlocked by Cisco TAC.

C. The token is locked until Cisco CTL Client is uninstalled and reinstalled on the client PC.

D. The token cannot be used on the same client PC again. lt can be used with another Cisco CTL Client on a different PC.

E. The token is locked forever.

Answer: E


Question No: 16

Which option is a mandatory LDAP attribute for a user to be synchronized to Cisco Unified Communications Manager?

A. uid

B. telephone Number

C. employee Number

D. sn

E. mail

Answer: D


100% Latest Cisco 400-051 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/400-051/ (New 705 Q&As)