70-412 Royal Pack Testengine pdf
100% Actual & Verified — 100% PASS
Unlimited access to the world's largest Dumps library! Try it Free Today!Get it now →
Exam Number/Code: 70-412
Exam name: Configuring Advanced Windows Server 2012 Services
n questions with full explanations
Certification: Microsoft Certification
Last updated on Global synchronizing
Exam Code: 70-412 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Configuring Advanced Windows Server 2012 Services
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-412 Exam.
2016 Apr 70-412 Study Guide Questions:
Q151. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas of each other.
Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1.
You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible to clients.
What should you do from Hyper-V Manager?
A. On Server1, execute a Planned Failover.
B. On Server1, execute a Test Failover.
C. On Server2, execute a Planned Failover.
D. On Server2, execute a Test Failover.
Test Failover (TFO) is an operation initiated on your replica virtual machine (in this scenario on Server1) which allows you to test the sanity of the virtualized workload without interrupting your production workload or ongoing replication.
TFO is performed on the replica virtual machine by right-clicking on the VM and choosing the Test Failover operation (either from the Hyper-V Manager or from the Failover Clustering Manager).
Reference: Types of failover operations in Hyper-V Replica – Part I – Test Failover.
Q152. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
You create a trust between contoso.com and a domain in another forest at a partner company.
You need to prevent the sales.contoso.com and the manufacturing.contoso.com names from being used in authentication requests across the forest trust.
What should you use?
Explanation: The Netdom trust command establishes, verifies, or resets a trust
relationship between domains.
Parameters include /RemoveTLNEX:
Removes the specified top level name exclusion (DNS Name Suffix) from the forest trust
info from the specified trust. Valid only for a forest transitive non-Windows realm trust and can only be performed on the root domain for a forest. Reference: Netdom trust https://technet.microsoft.com/sv-se/library/Cc835085(v=WS.10).aspx
Q153. You have a server named Server1 that runs Windows Server 2012 R2.
You start Server1 by using Windows RE.
You need to repair the Boot Configuration Data (BCD) store on Server1.
Which tool should you use?
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. All servers run Windows Server 2012 R2.
You install the DHCP Server server role on both servers.
On Server1, you have the DHCP scope configured as shown in the exhibit. (Click the Exhibit button.)
You need to configure the scope to be load-balanced across Server1 and Server2.
What Windows PowerShell cmdlet should you run on Server1? To answer, select the appropriate options in the answer area.
You have a server that runs Windows Server 2012 R2 and has the iSCSI Target Server role service installed.
You run the New-IscsiVirtualDisk cmdlet as shown in the New-IscsiVirtualDisk exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibits. Each correct selection is worth one point.
Up to date 70-412 free download:
Q156. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 is a file server that has the Hyper-V server role installed.
Server1 hosts several virtual machines. The virtual machine configuration files are stored on drive D and the VHD files are stored on drive E.
You plan to replace drive E with a larger volume.
You need to ensure that the virtual machines on Server1 remain available while drive E is being replaced.
What should you do?
A. Perform a quick migration.
B. Add Server1 and Server2 as nodes in a failover cluster.
C. Perform a live migration.
D. Perform a storage migration.
Hyper-V in Windows Server 2012 R2 introduces support for moving virtual machine storage without downtime by making it possible to move the storage while the virtual machine remains running.
Reference: Virtual Machine Storage Migration Overview
Q157. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table.
An IP site link exits between each site.
You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. You need to ensure that the SiteC users are authenticated by the domain controllers in
SiteB, unless all of the domain controllers in SiteB are unavailable. What should you do?
A. Create an SMTP site link between SiteB and SiteC.
B. Decrease the cost of the site link between SiteB and SiteC.
C. Disable site link bridging.
D. Create additional connection objects for DC1 and DC2.
By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA.
Q158. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named DHCP1 and DHCP2 that run Windows Server 2012 R2.
You install the IP Address Management (IPAM) Server feature on a member server named Server1 and you run the Run Invoke-IpamGpoProvisioning cmdlet.
You need to manage the DHCP servers by using IPAM on Server1.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area
and arrange them in the correct order.
Q159. Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running Windows Server 2012 R2.
You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort.
What should you do first?
A. Install the iSCSI Target Server role service and configure iSCSI targets.
B. Install the iSNS Server service feature and create a Discovery Domain.
C. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties.
D. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties.
Windows Server 2012 includes an iSCSI Target role that, along with Failover Clustering,
allows it to become a cost-effective and highly-available iSCSI Storage Array. We can connect from our Hyper-V host to the iSCSI target on the storage array with the following PowerShell command line:
New-IscsiTargetPortal –TargetPortalAddress <IP_Address or FQDN of storage array>
$target = Get-IscsiTarget
Connect-IscsiTarget –NodeAddress $target.NodeAddress
Not B. Discovery Domains in an iSCSI fabric, like zones in a Fibre Channel fabric, enable you to partition the storage resources in your storage area network (SAN). By creating and managing Discovery Domains, you can control the iSCSI targets that each iSCSI initiator can see and log on to.
Reference: Configure iSCSI Target Server Role on Windows Server 2012
Q160. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2. The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.
What should you do on Server2?
A. From Server Manager, review the IPAM overview.
B. Run the ipamgc.exe tool.
C. From Task Scheduler, review the IPAM tasks.
D. Run the Get-IpamConfiguration cmdlet.
Free 70-412 interactive bootcamp:
Q161. DRAG DROP
Your network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network
adapters installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
You build a test environment. The test environment contains one Active Directory forest. The forest contains a single domain named contoso.com. The domain contains the servers configured as shown in the following table.
You run the following commands.
New-ADReplicationSite Site1 New-ADReplicationSite Site2 New-ADReplicationSubnet -Name “192.168.1.0/24” -Site Site1 New-ADReplicationSubnet -Name “192.168.2.0/24” -Site Site2 New-ADReplicationSiteLink -Name “SiteLink1” –SitesIncluded Site1,Site2 -Cost 100 -
You promote Server3 and Server4 to domain controllers by using the default options.
Use the drop-down menus to select the answer choice that completes each statement.
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
The network has the physical sites and TCP/IP subnets configured as shown in the following table.
You have a web application named App1 that is hosted on six separate Web servers. DNS has the host names and IP addresses registered as shown in the following table.
You discover that when users connect to appl.contoso.com, they are connected frequently to a server that is not on their local subnet.
You need to ensure that when the users connect to appl.contoso.com, they connect to a server on their local subnet. The connections must be distributed across the servers that host appl.contoso.com on their subnet.
Which two settings should you configure?
To answer, select the appropriate two settings in the answer area.
Q164. You have a DNS server named Server1 that runs Windows Server 2012 R2. Server1 has the zones shown in the following output.
You need to delegate permissions to modify the records in the adatum.com zone to a group named Group1.
What should you do first?
A. Enable the distribution of the trust anchors for adatum.com.
B. Unsign adatum.com.
C. Store adatum.com in Active Directory.
D. Update the server data file for adatum.com.
Explanation: From the exhibit we see that the adatum.com zone is signed.
A trust anchor (or trust “point”) is a public cryptographic key for a signed zone. Trust
anchors must be configured on every non-authoritative DNS server that will attempt to
validate DNS data. You cannot distribute trust anchors until after a zone is signed.
Reference: Trust Anchors
Q165. Your company has offices in Montreal, New York, and Amsterdam.
The network contains an Active Directory forest named contoso.com. An Active Directory site exists for each office. All of the sites connect to each other by using the DEFAULTIPSITELINK site link.
You need to ensure that only between 20:00 and 08:00, the domain controllers in the Montreal office replicate the Active Directory changes to the domain controllers in the Amsterdam office.
The solution must ensure that the domain controllers in the Montreal and the New York offices can replicate the Active Directory changes any time of day.
What should you do?
A. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam from DEFAULTIPSITE1INK. Modify the schedule of DEFAULTIPSITELINK.
B. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge. Modify the schedule of DEFAULTIPSITELINK.
C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam from DEFAULTIPSITELINK. Modify the schedule of the new site link.
D. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge. Modify the schedule of the new site link.
We create a new site link between Montreal and Amsterdam and schedule it only between
20:00 and 08:00. To ensure that traffic between Montreal and Amsterdam only occurs at this time we also remove Amsterdam from the DEFAULTIPSITELINK.
Reference: How Active Directory Replication Topology Works
see more 70-412 - Configuring Advanced Windows Server 2012 Services